LuxShade Grand Double Pergola – Space for Your Moments (3 × 6 m) | Metal Kit

LuxShade Grand 3×6 m – metal connector kit

Room for a long garden table, slow weekend lunches and evenings together. Build your outdoor gathering space with a metal connector kit for a double modular timber pergola with a nominal 3×6 m footprint. Source your structural timber locally to suit the final project.

Included in the kit

• 6 × Veles single-arm bases in the selected main-frame size
• 4 × Perun OPEN three-arm corner connectors in the selected main-frame size
• 2 × Svarog OPEN four-arm cross connectors in the selected main-frame size
• 12 × P00510SKY connectors with two side arms, for 50×100 mm cross beams
• Assembly guidance

Choosing your timber size

The 10/10, 12/12 and 14/14 options refer to 100×100 mm, 120×120 mm and 140×140 mm main-frame timber respectively, with matching Veles, Perun OPEN and Svarog OPEN connectors. The twelve P00510SKY cross-beam connectors remain for 50×100 mm timber in all three options. Cross-beam lengths, spacing and timber quantities must follow the final project.

Not included

• Timber
• Roofing, polycarbonate or shade fabric
• Assembly screws and substrate-specific anchors
• Foundation preparation and installation

Technical specifications

• Nominal footprint: 3.00×6.00 m
• Suggested height: approximately 2.70 m, subject to the project
• Perun OPEN and Svarog OPEN connectors: 3 mm steel with an open top
• Veles bases and cross-beam brackets have their own specifications
• Arm length: 200 mm on the applicable OPEN connectors
• Finish: zinc primer and textured powder coating
• Fixing holes: staggered to reduce screw collisions inside the timber

Have structural timber cut to the dimensions required by the final project. Select suitable screws and anchors for the timber and substrate. Roofing, drainage, bracing and anchoring must be designed for the site, local weather loads and applicable requirements.